Last time we wrestled the neck into the pocket. Now we meet another common issue with aftermarket necks: Mismatched screw holes. Find out how to deal with this…
Read More
Fitting a new bolt-on neck should be a relatively straightforward process. However, sometimes necks can fight back a little. Check it out…
Read More
Should you use a notched straight edge for guitar and bass setup? It’s a precision tool and is invaluable for some jobs. But maybe not setup. Read more…
Read More
Dealing with truss rods can often be a frustrating experience. There are no real standards. For the most part, you’ll encounter a smallish number of adjustment nuts and tools but sometimes makers throw curveballs. Looking at Maton today…
Read More
I’ll return to tremolo stabilisation (a particular implementation) at some point in the future but, for now, I’ve a few thoughts to round out the subject, including an important caveat for all these systems. Check it out…
Read More
After blocking, after dive-only setups, after tremolo-stops… It’s time to look at ways to keep the bridge fully floating but still add a little extra stability to the system. Let’s take a look at tremolo stabiliser devices…
Read More
We understand how to block a trem completely. We understand some of the problems inherent in a fully floating trem system. Now let’s look at some possible solutions to help bring a little stability.
Read More
All this tremolo/vibrato bridge system talk has prompted me to talk about the problems that are inherent in these systems. Let’s consider the delicate balance and how some chimps can upset things…
Read More
A vintage Strat-style tremolo is relatively easy to block. A fully floating trem bridge is more challenging to do properly. The bridge should be blocked so it’s fixed in its ‘neutral’ position. That needs a little more work…
Read More
Don’t like that wobbly bridge on your Strat? Fed up with it moving about when you bend strings or (oh no) going out of tune when a string breaks? Well, block that bridge.
Read More
It’s not too tricky to find information with some specs for setting nut slot height for guitars and basses. But what about a fretless bass? How should you slot the nut on that for the best playability? Find out…
Read More
I talk (rant) a lot about using full-pocket shims when shimming a guitar neck. And, while you can certainly buy some for an easy life, if you’ve access to a 3D printer, it seems you can now print some.
Read More