Sometimes you can use whatever’s handy to plug a hole; toothpick, dowel, or whatever. Sometimes, though, actually cutting a plug is the better way to go. Check out the pros and cons…
Read More
Keep those strings out of your way when you work on your guitar. It’s easy (easier) with string spreaders.
Check it out…
Read More
Need to repair a really screwed-up nut slot? Can’t replace the original and have to work with what you have? Slot too damaged for the baking-soda-and-superglue trick? Well, I may have just the thing for you… Bone grafts.
Read More
Nut slot too low? The baking soda and superglue trick can really get you out of a hole pretty quickly. It’s best as a temporary repair but can sometimes work longer term too.
Check it out…
Read More
Paper or cardboard is usually a terrible, tone-sucking material to use as a shim. Unless you learn this one cool trick that Big Nut doesn’t want you to know. You won’t believe what happens next! 😉
Nah, seriously… It’s good.
Read MoreA nut with a low slot (or slots) is a pain. It buzzes when you play the open string and sounds generally awful. You could replace it with a nice new nut but, sometimes you’re in a hurry or on a budget.
Enter the shim…
Read More
WE’ve looked a some methods to remove a worn or broken screw. These have mostly involved gripping the screw in some way to try unscrew it from the guitar. But what if there’s just no way to grip the screw? What’s the thing we leave until the very end to try?
Check it out…
Read More
If there’s just no grip left on the screw, it might be necessary to drill out its head in order to remove whatever it’s holding in place (a pickguard or tuner for instance). Learn how to drill worn or stripped screw heads for removal.
Check it out…
Read More
Screws can get worn, corroded, and crammed with crud over the years. Removal can become challenging. Here’s the first in a series of posts with tips for removing stubborn screws.
Check it out…
Read More
Answering questions about the clever fix made to address limitations around replacing the zero fret on Brian May’s famous Red Special guitar. Great thinking…
Read More
A while back, I wrote about some methods for enlarging holes — for instance, if you wanted to fit larger tuners or a larger control pot into a hole that had housed something smaller.
But what if you want to go the other way? What if you want to remove some hardware that’s bigger than the stuff being installed?
Read More
Guitar and bass neck sometimes get ski jump deformations. Turns out it’s important how you define your ski jump. Avoid confusion and check this out…
Read More