A bone nut is a fantastic upgrade for a guitar or bass. I’m going to step you through how I make a great nut from a bone blank.
Check it out…
Read More
It’s a good question: How do I know if there’s a problem with my guitar or bass nut?
Find out…
Read More
Zero frets are all well and good but what happens when you need to level or refret a guitar with one? How do you handle a zero fret during fret-work?
Read More
Why do some tuners have pins sticking out the back and no screw-holes? How would you go about installing tuners like this on your guitar? Well, it’s a little more involved than a screw-secured tuner but it’s still pretty straightforward.
Check it out…
Read More
Last time with looked at one of the biggest problems with installing vintage-style tuners in place of modern ones. This time we do the easy bit: the actual installation.
Read More
Swapping out your modern sealed tuners for more of a vintage vibe presents a problem. Those newer tuners mean you’ve got a bigger hole in the headstock than you need. Here’s how to fix that.
Read More
Because there are many variables when it comes to tuning problems, it’s not terribly helpful to give your guitar to a tech and say, “It won’t stay in tune.” Having a think about some stuff beforehand can make a good result more likely.
Read More
Getting a Takamine preamp out of the guitar body is something that’s confusion to many. There are no obvious screws or clips. There’s a hole that might do something but, just one. What gives?
Read More
Taylor’s Expression System preamp mounts very sleekly in the side of their guitars. If you ever have to remove one, though, you hit some bushings that can cause head-scratching. Check out the best (and safest) way to remove them.
Read More
Sometimes you can use whatever’s handy to plug a hole; toothpick, dowel, or whatever. Sometimes, though, actually cutting a plug is the better way to go. Check out the pros and cons…
Read More
Keep those strings out of your way when you work on your guitar. It’s easy (easier) with string spreaders.
Check it out…
Read More
Need to repair a really screwed-up nut slot? Can’t replace the original and have to work with what you have? Slot too damaged for the baking-soda-and-superglue trick? Well, I may have just the thing for you… Bone grafts.
Read More